Shop - Accessories

Mini-NodeMcu Lua WiFi-Board based on ESP-8266-12F

Features:

• compatible with Espressif ESP32 DEV KIT C
• built-in ESP-WROOM-32 chip
• 4MB Flash, 520KB SRAM
• uses wireless protocol 802.11b/g/n
• Bluetooth v4.2 BR/EDR and BLE
• built-in PCB antenna
• uses CP2102 USB Serial Chip

Fits perfectely in our AZ-Touch and ArduiBox ESP Kits

MBUS Master modules for integration in your own projects with the following features:
- MBUS Master for a maximum of 6 load units (9 mA)
- galvanic isolation
- MBUS supply voltage 5 - 24VDC
- Supply voltage digital side 3.3V - 5V
- Dimensions 33mm x 30mm x 12mm

Spare part set for AZ-Touch. Contains different female headers:

• 1x 14pole female header for display
• 2x 19pole back entry (centipede) header
• 2x 8pole back entry (centipede) header

Do you need more power for your application? You can combine this voltage regulator module with your ArduiBox or RasPiBox Basic Kit:

• Input Voltage: 9V - 35V DC
• Output Voltage: 1.23V - 30V (pre adjusted to 5V)
• Output Current: 3A (Max)

Extend your Arduibox and/or RasPiBox enclosure kit with a breadboard. In combination with our soldering and assembly service you need no soldering skills to realise your own extension circuits.

• self adhesive breadboard
• grid 2,54mm
• dimension (L x W x H) 46 x 35 x 9mm
• 170 contacts in 17 columns and 10 rows
• incl. two  20pole socket strips

For usage in extra low voltage (<25 V AC or < 60V DC) circuits only.

RS485 Module for integration in our RasPiBox Open, RasPiBox Zero and Arduibox enclosure sets:

• On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication
• On board 5.08(mm) 2P connector for RS 485 wires
• All the pins of the chip are brought out, can be controlled by MCU
• Working voltage 5V
• PCB dimension:44(mm)x14(mm)

Attention. In combination with Raspberry Pi a simple voltage divider as level shifter is needed. Please see the application note!

MeanWell power supply unit type DR-15-5 for DIN rail as extension for our RasPiBox Basic Kits and ArduiBox Basic Kits:

• Directly mountable on the DIN rail
• Closed design, screws connections protected against accidental contact
• Universal input
• Overload protection via current limit, auto recovery
• Protected against short circuit, overload, excess voltage
• Low idle power
• LED display for power on
• Insulation class II

Technical data:
Output voltage: 5 V DC
Output voltage range: 4.75 - 5.5 V
Output current: 2.4 A
Output: 12 W
Ripple: 80 mVp-p
Input voltage: 85 - 264 V AC/120 - 370 V DC
Efficiency: 77%
Starting current, max.: 65 A/230 V AC
Operating temperature: -40 - +85°C
Size: 25 x 93 x 56 mm
Weight: 0.1 kg